Export to Psion


Drawing|Export|Psion

Data transfer between Psion and Geodos is very easy. The Psion is connected to one of the serial ports. You can export co-ordinates directly from the drawing, roadlines (.trl), road profiles (.trp) or road camber (.tcf).

To export co-ordinates:
  1. Open the drawing you want to export.
  2. Connect the Psion to the computer with its own Comms link.
  3. Select the object(s) you want to export. It is possible to select them one at a time or all together.
  4. Click on Export- Psion. The settings will usually be correct but it is possible to change them under Port settings.
  5. On the Psion click Receive and select where you want to store the data.
  6. Click on Send.
To export roadlines/road profiles and camber form:
  1. Click Export|Psion.
  2. Connect the Psion to the computer with its own Comms link.
  3. Check the [  ] Export road information box and click OK.
  4. A dialogue box will be displayed. Select which roadline (.trl), road profile (.trp) and road camber form (.tvf) you want to export.
  5. On the Psion click Communication and select an Excel file.
  6. Click OK in Topocad.
  7. Click Receive on the Psion.