Export to Leica


Drawing|Export|Leica

It is possible to transfer data between the Leica instrument and GIF10, GRE3, GRE4 and PC Card with GSI files (8- and 16-bit). It is also possible to export roadlines and road profiles.

To export to the instrument or field computer:
  1. Open the document you want to export.
  2. Connect the field memory to the computer. The Leica cable connection is a 25-pin contact. You may need to use an adapter.
  3. Select the object(s) you want to export. You can select them one at a time or all together.
  4. Click on Export and then Leica.
  5. In the upper field select the type of field memory to be used: GIF 10, GRE3, GRE4 or GSI format. The settings will usually be correct but it is possible to change them under Port settings.
  6. Click on Send.
To export to a file (PC Card):
  1. Open the document you want to export.
  2. Select the object(s) you want to export. You can select them one at a time or all together.
  3. Click on Export and then Leica.
  4. Mark the box ”r;Export to file”r;.
  5. Click OK. Select file format - GSI8 or GSI 16.
  6. Click OK.